Product Manual

Operating Instructions
14
Resetting Maintenance Alarms (Continued)
12. Press Down Arrow and CHANGE OIL
FILTER shows in the display. Press Enter.
13. Using Enter move over to NO and use the
Up Arrow to change it to YES then press
Enter and hours are reset.
14. Press Down Arrow and CHANGE SEP.
(Separator) FILTER shows in the display.
Press Enter.
15. Using Enter move over to NO and use the
Up Arrow to change it to YES then hit
Enter and it resets the hours. Separator
filter should be set at 4000 hours.
16. Press Down Arrow and CHANGE OIL
FILTER shows in the display, but the
first Line is C--=. This is the screen for
the oil life. Press Enter.
17. Using Enter move over to NO and use the
Up Arrow to change it to YES then hit
Enter and it resets the hours.
18. Press Down Arrow and CHECK
COMPRESSOR shows in the display.
Check belt condition and belt tension.
Give your compressor a good overlook
noting any changes since last machine
maintenance. Press Enter.
Change NO to YES
Change NO to YES
Change NO to YES
Change to 4000
Change to 4000