Air Compressor Manual

EMAX Piston Air Compressors

1. Connect rst power lead to 1L1.

2. Connect second power lead to 3L2.

3. Connect third power lead to 5L3.

4. Connect ground wire to existing motor ground wire.

5. Check for proper motor rotation. When facing motor shaft, pulley should turn counterclockwise. If rotation is

reversed, turn off power then switch two power leads.

1. Make sure all operators receive product training, read and understand all instructions.

Three Phase Motors (See gure 7)

WARNING

Ensure wiring is installed according to voltage required for proper

motor operation (220V or 460V).

Keep all ammable, combustible, poisonous and noxious materials

away from operating area. Make sure there are no oily rags, trash,

leaves, litter or other combustible materials in operating area. Keep

suitable, fully charged re extinguishers nearby when servicing and

operating the compressor.

CAUTION

Safety Rules

Operation