Pump Manual

9
Required maintenance Schedule to maintain warranty status
➢ All units are shipped with break-in oil and must be changed no less than 70 hours to insure gasket seating.
➢ After the 70 hours of break-in you must change the oil
➢ Thereafter Oil Should be changed every 6 months or 1000 hours whichever occurs first.
➢ Always maintain proper oil level in unit. If the unit runs out of oil due to neglect the warranty will be void.
➢ Use only Airbase Industries approved oils in your compressor, or your warranty is void.
**Extended Limited Lifetime Pump Warranty With participation in our SMART OIL™ extended auto ship program Airbase
Industries will extend your warranty plan to **Limited Lifetime Warranty on the pressure lubricated pump. All other non-wear and
tear components to 10 years. SMART OIL™ not only extends the life of your compressor pump, it also can reduce operating noise
levels and can create further energy savings. Warranty repair parts under the Limited Lifetime warranty will not include any shipping
charges beyond the Standard Warranty, therefore owner is responsible for all freight charges for warranty parts. This plan includes our
advanced technical air support. Smart Tech Support provides you with the highest level of technical support. Smart Tech support is an
interactive support team available to you at your fingertips by just downloading a free app. The app provides free remote meetings,
interactive touch display, real live personal to assist.
Limited Lifetime Warranty is not prorated and has no hour limits.
**Limited Lifetime Warranty, non-prorated, no hour limits. In the case the product has been discontinued at any point the Limited
lifetime Pump warranty will last five years past the discontinued date. Warrantor has discretion to substitute parts with current model
for the five-year duration
*In order to maintain Limited Lifetime Warranty status, the owner must adhere to and purchase from Airbase Industries the required
maintenance items as scheduled below utilizing our Smart Whisper Blue Auto Ship program:
Required maintenance Schedule to maintain warranty status
➢ All units are shipped with break-in oil and must be changed no less than 70 hours to insure gasket seating.
➢ After the 70 hours of break-in you must change the oil
➢ Thereafter Oil Should be changed every 6 months or 1000 hours whichever occurs first using only our Smart Whisper Blue
Oil
➢ Always maintain proper oil level in unit. If the unit runs out of oil due to neglect the warranty will be void.
➢ Use only Smart Whisper Blue Oil and filters purchased from Airbase Industries in your compressor, or your warranty will
be voided.
➢ Must be an active member of Airbase Industries auto ship program
• Warranty Shall not apply and Airbase Industries shall not be responsible nor liable for:
➢ Routine service such as oil changes, filter replacements, gasket tightening to correct oil seepage or drive belt tightening
and valve cleaning and are not covered under warranty.
➢ Consequential damages such as but not limited to cost of loss of business, product damage, or down time
➢ Acts of nature, over abuse, malicious destruction, improper maintenance, undersized equipment
➢ In the case the product has been discontinued at any point the *Limited lifetime warranty will last five years past the
discontinue date. Airbase Industries has discretion to substitute parts with current model for the five-year duration.
➢ Deviation from operating instructions or specifications
➢ Labor charges for repairs or maintenance made by person(s) other than an authorized, approved service technician or
any labor after the 1-year Standard Warranty expires.
➢ Normal wear and tear parts included but not limited to valves (intake/suction, check, blowdown, thermo, pop off,
unloader), and ball valves. Belts, shaft seals, load/unloader solenoids, sensors (temperature or pressure), Electrical
contractors and relays, and any parts with a routine maintenance schedule
Warranty shall be voided under the following conditions: Exposing electrical components to rain or water, or installing the unit in a
hostile environment such as acid vapors or any caustic or abrasive matter that may be ingested into the pump, or installing the unit in
an enclosed area where lack of cooling ventilation is present, such as in boiler or equipment rooms where the ambient air exceeds
100F.
Further exclusions include failure to fully and completely follow the guidelines set forth in the manual. Of specific note is
environments where fine dust is common, such as granite, marble or concrete plants, the compressor MUST be installed in a separate
area with its own dedicated ventilation. FAILURE TO PROVIDE THIS DUST FREE OPERATING AREA VOIDS THE
WARRANTY.
Parts used for warranty purposes must be supplied by Airbase Industries. Warranty work should be performed by an Airbase
Industries approved Technician. If any maintenance (other than routine maintenance) is performed by a non-approved Technician,
written pre-approval must be obtained from Airbase Industries, to prevent voiding this warranty. Failure to fully comply with this
warranty and fully comply with the manual instructions will void this warranty.
Warranties are non-transferable
The oil purchase and maintenance program are effective as of Nov. 2019