Use and Care Manual

Page 5
Maintenance and/or control operation to be very carefully performed by
qualified personnel 1.
Compressed air inlet connection point.
Compressed air outlet connection point.
Condensate drain connection point.
Operations which can be worked out by the operator of the machine, if
qualified 1.
In designing this unit a lot of care has been devoted to the protection of the
environment:
• Dryer and relevant packaging composed of recyclable materials.
• Energy saving design.
Not to spoil our commitment, the user should follow the few ecological
suggestions marked with this sign.
Compressed air is a highly hazardous energy source. Never work on the
dryer with parts under pressure. Never point the compressed air or the
condensate drain jet towards anybody.
This user is responsible for the installation of the dryer, which has to be executed
on the basis of the instructions given in the “İnstallation” chapter. Otherwise,
the warranty will be voided and dangerous situations for the personnel and/or
damages to the machine could occur.
Only qualified personnel can use and service electrically powered devices.
Before attempting any maintenance action, the following conditions must
be satisfied :
• Ensure that any part of the machine is under voltage and that it can
not be connected to the mains.
• Ensure that any part of the dryer is under pressure and that it cannot
be connected to the compressed air system.
Any change to the machine or to the relevant operating parameters, if not
previously verified and authorised by the Manufacturer, in addition to create
the possibility of dangerous conditions it will void the warranty.
Don’t use water to extinguish fire on the dryer or in the surrounding area.
1.3 WARNINGS