Energy Guide

04.24.13 Rev. 0.3a 11

MAIN MENU

Power ON the compressor and the LCD visualizes the main menu where:

a) on the first row, working pressure and air end temperature probe;

b) on the second row, compressor status:

OFF = compressor ready to start by the Start button ;

IN SET = compressor in stand by for pressure set reached;

LOAD RUNNING = compressor working;

UNLOAD RUNNING X SET = compressor running unload for pressure set reached;

UNLOAD RUNNING (blinking) = compressor is going to stop;

OFF BY REMOTE STOP = contact of remote start/stop remote open;

OFF BY TIMER – NEXT ON: XX:XX = compressor stopped by timer and visualization of the time to the next start;

when the compressor is stopped by timer, pushing the button for about 3 seconds, the start is forced and

when the button is pushed, it stops coming back under timer operation.

WAIT= safety timer in progress.

Visualizing the main menu pushing:

- the button go to the visualization and setting of language, scale of temperature (°C/°F), scale of the pressure

(Bar/PSI);

- the button go to the visualization and setting of the user parameters;

- the buttons + go to the menu to set the password number (service 1 – service 2 – factory 3) to enter into

the next menu.

NOTE:

1) ANTIPANIC FUNCTION: in any step of the flow pertinent to the setting and/or visualization, pushing the button

longer than 5 seconds, shift back to the main visualization.

2) After 120 seconds from the last pushing of any button, the LCD visualizes the main menu automatically.

3) During the visualization and/or setting, the controller is activated and eventual alarms are detected and visualized

in the main menu.

SETTING °C/°F, BAR/PSI , LANGUAGE

n the main menu, pushing the button the LCD visualizes the message “°C – Bar – LANGUAGE”; pushing the

button enter into the programming and the LCD visualizes the message “°C” (blinking) and “°F”: by the button

and/or select the scale needed to visualize the temperature and by the button confirm the selection;

the LCD visualizes the message “Bar” (blinking) and “Psi”: by the button and/or select the scale needed to

visualized the pressure and confirm the selection by the button ; the LCD visualizes the message “ITALIANO” and

by the button and/or select the language among Italian – English – French – German – Spanish – Portuguese

– Turkish – Russian; by the button confirm the language selected; by the last pushing of the button the

controller shift back to the main menu.