Energy Guide

04.24.13 Rev. 0.3a 15
c)
if Maintenance mode has been confirmed, you enter into a menu to select YES/NO and set the way to
maintenance.
YES: the compressor is excluded by the multiunit operation, it shifts to standing alone operation so you can carry
out the normal maintenance.
MENU 9 = ALARMS
Memory of the alarms: visualization of he progressive
number, date and time the alarm has been detected and
pertinent cause.
The memory holds up to 20 alarms: the 21st erases the first one and so on; if there is not any alarm into the memory,
the LCD visualizes the message “MEMORY EMPTY”.
MENU 10 = RESET
Descri
ption
Password
level
Working hours 3
Alarms 2
-3
Maintenance 2
-3
G
eneral
3
By
the button and/or select the message and confirm reset by .
Example: if “Working hours” has been selected and confirmed, on the second row the LCD visualizes the blinking
message “RESETTING”; when the reset is complete (total hours, load hours and working percentage), the LCD shift
back to the message “Working hours”.
After the last message the LCD shift back to menu “RESET”.
NOTE: the GENERAL reset is accepted only when the compressor is “OFF” and the controller will load all the default
values.