Energy Guide

04.24.13 Rev. 0.3a 17
MENU 12 = CLOCK TIMER (use password 666666)
Set the automatic start and stop of the compressor.
On the first row the LCD visualizes the message “OFF – ON” (OFF blinking); by the button and/or select:
OFF: if you need to start and stop the compressor by the pertinent buttons; confirming this selection by the button
, the LCD shift back to the message “CLOCK TIMER”.
ON: if you need to start and stop the compressor operated by timer; confirming this selection by the button the
LCD visualizes the message:
DAY 1 (1 means Monday and 7 Sunday)
By the buttons and/or select the day and confirm it by ; on the second row the LCD visualizes the message
1 ON 00:00 – OFF 00:00
with the 1st ON hour (hours and minutes) blinking: set it by the button and/or ; confirming it by , the first
OFF hour starts blinking and it get automatically the data set on the first ON hours and so on till the last OFF hour (for
every day of the week three ON/OFF selections are available).
Confirming the last OFF hour of the day selected, the LCD visualizes the request to set the next day; repeat the same
procedure for all 7 days of the week.
If you need to copy the setting of the previous day, after you’ve confirmed the day by , push in sequence the
buttons and .
If you need cancel the setting after the day has been confirmed, push in sequence the buttons and .
After the last OFF hour of the 7th day has been confirmed, the LCD visualizes the following message:
DLS TIME: NO - YES (default YES)
YES = the summer changes into DLS time the last Sunday on March and October, at 2:00 am in March, at 3:00 am in
October.
NO = the change summer / DLS time is not operated.
NOTE:
- The setting range of each hour is between 00:00 e 23:59.
- If the third OFF hour goes over 23:59, the setting shift to the next day and it’s indicated on the upper row where the
message change from "DAY 1" change into "DAY 1-2".
- If the setting of OFF hour is the same of previous ON hour, this setting is not taken into consideration.
- Examples:
a) Set the hours on three levels
1 ON 07:30 - OFF 12:30 - 2 ON 13:30 - OFF 17:30 - 3 ON 18:30 - OFF 23:30
b) Set the hours on two levels
1 ON 07:30 - OFF 12:30 - 2 ON 13:30 - OFF 17:30 - 3 ON 17:30 - OFF 17:30
c) Set the hours on one level
1 ON 07:30 - OFF 17:30 - 2 ON 17:30 - OFF 17:30 - 3 ON 17:30 - OFF 17:30
d) Compressor OFF all the day
1 ON 00:00 - OFF 00:00 - 2 ON 00:00 - OFF 00:00 - 3 ON 00:00 - OFF 00:00
NOTE: in case the compressor stops by timer, it’s possible to force starting by pushing the start button for 3 seconds.