Instruction Manual

2.4 Video channel Auto Search

There is an automatic search function "A" on Transporter 2 to help find which channel the

Tinyhawk III is on. Power on the Tinyhawk III first, then press the "A" button on the

Transporter 2 to start the auto search mode. This mode will search all channels and select

the channel with the best video reception. After searching all channels, the best channel

number, frequency group and frequency will be displayed in the upper left corner of the

screen.

Warning: If there are multiple Tinyhawk III (or other drones' image transmission)

working at the same time, using this function may select the wrong drone channel.

We recommend selecting the correct channel manually to prevent false matches.

2.5 Turn on & turn off recording

Short press the R button on the right side in order to begin recording DVR. The top

middle position on the display will show a red dot indicating the DVR is on. A DVR red

LED will also turn on indicating the DVR is ready to record. When the Red Display Dot

and Red LED begin flashing, the DVR will then be recording.

When the DVR is recording, short press the R button to stop recording, indicated by

the Red Display Dot and Red LED turning off.

Video Clip Length: Open the Menu and select RecTime in order to select the length of

each video clip from the DVR. Optional: 3min, 5min, 10min, off.

2.6 Card recording parameter setting

Short press the M button on the left to call up the screen/card record parameter setting

menu; (TF card needs to be purchased separately)

Short press the left M button again to select the RecTime submenu and press the left

M button each time to select the next submenu;

Short press the B/C button on the right to select the appropriate parameter.

2.7 Screen parameter setting

Single key "M" will open the menu, you can adjust the brightness, contrast, saturation and

language. After entering the menu, press the menu key "M" once to select the next menu

option. By highlighting the currently selected menu, you can press the "B" button and the

"C" button to adjust the increment and decrement. If no key input is detected, the menu

will automatically close after 3 seconds.

2.8 Battery & Charging

Transporter 2 is pre-installed with a 1300mAH lithium battery. If you need to reinstall or

replace the battery, please open a support ticket on our official website for help. Do not

open the back cover yourself to avoid damage to the product. Doing so will void warranty.