User's Manual

www.embedcard.com 5
Recommended Installation Hardware
The following is a recommended range of hardware to securely install and mount the
ICR. The ICR uses 4mm brass inserts in the base of the enclosure so the appropriate
length 4mm metric screws must be used to properly secure the ICR. All other
hardware can be adjusted to what is most appropriate and available in your area.
M4 metric, pan head, Philips drive, and zinc coated steel screws.
 Used to secure the ICR to the surface of the game or attraction.
 Recommended you have lengths of 10mm, 20mm and 25mm available as
a minimum.
M4 metric, zinc coated steel washers.
 Recommended these are used under every screw.