User's Manual

www.embedcard.com 7
smartTouch Swipe Reader Installation
The smartTouch Swipe reader is best mounted and fixed to a location on the game that ensures
it’s easily accessible to guests. In many cases it’s recommended to mount the smartTouch Swipe
reader over the existing coin entry point as it is readily accessible and allows use of the existing
hole for cable entry.
The smartTouch Swipe reader display is usually mounted in landscape display orientation.
Step 1: Locate the ideal position to mount the smartTouch Swipe reader.
Step 2: Mark the spots for drilling. Use the smartTouch Swipe reader mounting template to mark
the four mounting points and the cable connection point.
Step 3: Drill the four mounting points with a 5mm drill-bit. Drill a harness connection hole with a
12.5mm step drill-bit. Clear the holes of sharp edges to protect the harness.
Step 4: Connect the harness to the connector in the bottom of the smartTouch Swipereader.
Feed harness through the hole in the cabinet and position the smartTouch Swipe reader to line
up with the screw mounting holes. Insert the correct length 4mm screws into the base of the
smartTouch Swipe reader and tighten.
Landscape Orientation