User manual

AOAA Kit – Software User’s Guide

Page 14

Figure 6 - AOAA Board: CAN Demo

The CAN node has a light sensor, a temperature sensor, a button, an RGB LED and a red LED. All are

accessed in this demo.

Note 1: As long as the CAN node is connected to the AOAA Board there is no way to test the plug-

and-play functionality of the CAN bus. The CAN node must be separated from the LPC1769 side and

connectors mounted in order to test the plug-and-play functionality. See Figure 7 for an example where

the CAN Node is separated from the AOAA Board.

Figure 7 - CAN Node Separated

Powering of the

board

Connected to

Android device

CAN Node