User manual

AOAA Kit – Software User’s Guide
Page 23
Copyright 2012 © Embedded Artists AB
Figure 21 - AOADemo in Eclipse editor
4.3 Setting up Projects in LPCXpresso
This section describes how to compile the demo applications for the LPC1769 (the same applies for
the LPC11C24), developed on the LPCXpresso IDE. There are introduction videos and presentations
about how to get started with the LPCXpresso IDE on the LPCXpresso website, see reference [13].
1) Make sure that the latest version of the LPCXpresso IDE is installed.
2) Download the package of sample application projects into the Eclipse workspace. The
package can be downloaded (as a zip-file) from Embedded Artists’ support page after
registering the product. The zip-file contains all project files and is a simple way to distribute
complete Eclipse projects.
3) Start the LPCXpresso IDE and select a new (and empty) workspace directory.
4) Select the Import and Export tab in the Quickstart Panel and then Import archived projects
(zip), see Figure 22 below.