User manual

AOAA Kit - User’s Guide

Page 15

3.8 Step 7: Run the Demo Application

1. Connect the USB cable (USB micro-B to A) between the Android device and J3, if not already

done.

2. A dialog will appear indicating that there is no installed application that work with the USB

Accessory. Click the View button to download the application from Embedded Artists website.

3. When the application has been downloaded a dialog will appear asking if it is okay to install

the application. Select Install.

4. After installation has completed it is possible to Open and start the application.

5. When the application starts allow it to access the USB accessory. Select OK.

The demo application is now running on the Android device and communicating with the AOA board!