Manualshelf

User manual

ManualsBrandsEMBEDDED ARTISTS ManualsDev KitsPCB design board
38394041424344454647
AOAA Kit - User’s Guide
Page 44
Copyright 2012 © Embedded Artists AB
The selected projects are now imported. Click (to select) the project to work with. Browse and edit the
project files. Build/clean/debug the project from the Quickstart menu (Start here), see picture below.
When debugging a project, make sure the AOAA board is connected via LPC-LINK to the PC because
the application will be downloaded to the board via LPC-LINK (SWD debug interface).
Figure 35 – LPCXpresso IDE Build/Debug Project
When the code has been downloaded execution will stop at the first line in the main function. Press F8
on the computer keyboard to resume/start execution.
1) Click (to select) main project
3) Build/clean/debug project
2) Browse and edit project files