User manual

Low-power Application Kit (Oryx) - User’s Guide
Page 18
Copyright 2012 © Embedded Artists AB
Figure 4 – LPCXpresso IDE Import Archived Project Window
All sample projects are now imported. Click (to select) the project named ‘DemoApp’. Browse and edit
the project files. Build/clean/debug the project from the Quickstart menu (Start here), see picture
below. When debugging a project, make sure the board is connected via USB connector J9 (the LPC-
LINK side) to the PC because the application will be downloaded to the board via LPC-LINK (SWD
debug interface).
1) Browse and select
archived project file
2) Select all sub-
projects in list
3) Import project