User manual

Low-power Application Kit (Oryx) - User’s Guide
Page 23
Copyright 2012 © Embedded Artists AB
There is an alternative way of initiating the program download process. From the workspace, right click
on the *.axf or *.bin file (found under the “Debug” subdirectory). Then select “Binary Utility” and
“Program Flash”.
Figure 11 – LPCXpresso IDE Binary Utility
Press the reset push-button. The startup message from the Demo application should be displayed on
the LCD.
1) Right click on
*.axf or *.bin file
2) Select “Binary Utility”
3) Select “Program Flash”