User manual

Low-power Application Kit (Oryx) - User’s Guide
Page 31
Copyright 2012 © Embedded Artists AB
also programs some BMP pictures on the serial flash. This application can be used to verify
that a specific board is correct (if a hardware error is suspected).
 RTC_irq-wakeup – this application demonstrates the RTC and how the 1Hz tick can be used.
 Semihosting_ADC_temperature_sleep – this application demonstrates semihosting, which
is a technique where an application can use printf() to display information on the LPCXpresso
IDE.
 Systick_wdt_lcd_capsense – this application demonstrates the capacitive sensors.
 USB_HID – this application demonstrates USB HID. Use in conjunction with the NXP
application for LPC1343 HID. It is possible to control the LED on the board and the Wakeup
push-button can signal back to the PC (LPC1343 HID application on the PC).