Datasheet

SPEC No.
LCP-1109027
MODEL No.
LS013B4DN04
PAGE
9
5. Absolute Maximum Rating
Table5-1 ( GND＝0V )
Item Symbol MIN. MAX. Unit Remark
Analog VDDA -0.3 ＋3.6 V Power
supply
voltage
Logic VDD -0.3 ＋3.6 V [Remark5-1]
Input signal voltage(high) VDD V [Remark5-2]
Input signal voltage(low) -0.3 V
Strage Temperature Tstg TBD TBD ℃ [Remark5-3,4]
Operation Temperature
(at panel surface)
Topr1 -10 ＋60 ℃ [Remark5-5]
[Remark5-1] Applies to EXTMODE.
[Remark5-2] Applies to SCLK, SI, SCS, DISP, EXTCOMIN.
[Remark5-3] Do not exceed this temperature in any parts of module.
[Remark5-4] Maximum wet bulb temperature is 57℃ or lower. No condensation is allowed.
Cndensation will cause electeical leak and may cause the module to not meet this specification.
[Remark5-5] Operating temperature is the temperature that guarantees only for the operation.
For contrast, response time, and other display quality determination, use Ta＝＋25℃.