Datasheet

SPEC No.
LCP-1109027
MODEL No.
LS013B4DN04
PAGE
18
6-5-4 All Clear Mode
Clears memory internal data and writes white. (M0=”L”、M2＝”H”)
SCS
SI
DUMMY DATA(don't care) DUMMY DATA(don't care)
SCLK
M1 M2M0 M1 M2 M0
tsSI thSI
tsSCS
twSCSH
tV
thSCS
twSCSL
Mode selection
period
(3ck)
Data transfer period
(More than 13ck)
M0: Mode flag.
Set it “L”.
M1: Frame inversion flag.
When “H”, outputs VCOM=”H”, and when “L”, outputs VCOM=”L”.
When EXTMODE=”H”, it can be “H” or “L”.
M2: All clear flag.
Set it “H”
DUMMY DATA: Dummy data. It can be “H” or “L” (“L” is recommended.)
※M1: Frame inversion flag is enabled when EXTMODE=”L”.
※When SCS becomes “L”, M0 and M2 are cleared.