User manual

悠景科技股份有限公司
15
7.2 RD recommend Initial Code for 8080 Interface
write_c(0xfd); // Set Command Lock
write_d(0xb1);
write_c(0xae); // Display off
write_c(0x15); //set column
write_d(0x00);
write_d(0x7f);
write_c(0x75); //set row
write_d(0x00);
write_d(0x7f);
write_c(0xa0); // Set Re-map / Color Depth
write_d(0x74);
write_c(0xa1); // Set display start line
write_d(0x00);
write_c(0xa2); // Set display offset
write_d(0x00);
write_c(0xa6); // Normal display
write_c(0xab); // Set Function selection
write_d(0x00);
write_c(0xaf); // Set Sleep mode
write_c(0xb1); // Set pre & dis_charge
write_d(0x32);
write_c(0xb3); // clock & frequency
write_d(0xf1);
write_c(0xb4); // Set Segment LOW Voltage
write_d(0xa0);
write_d(0xb5);
write_d(0x55);
write_c(0xb5); // Set GPIO
write_d(0x0A);
write_c(0xb6); // Set Second Pre-charge Period
write_d(0x01);
write_c(0xb8); //Set Gray Table
write_d(0); //0
write_d(2); //1
write_d(3); //2
write_d(4); //3
write_d(5); //4
write_d(6); //5
write_d(7); //6
write_d(8); //7
write_d(9); //8
write_d(10); //9
write_d(11); //10