User manual

U
U
n
n
i
i
v
v
i
i
s
s
i
i
o
o
n
n
T
T
e
e
c
c
h
h
n
n
o
o
l
l
o
o
g
g
y
y
I
I
n
n
c
c
.
.
Doc. No: SAS1-D038-A
22
8
8
.
.
P
P
r
r
e
e
c
c
a
a
u
u
t
t
i
i
o
o
n
n
s
s
W
W
h
h
e
e
n
n
U
U
s
s
i
i
n
n
g
g
T
T
h
h
e
e
s
s
e
e
O
O
E
E
L
L
D
D
i
i
s
s
p
p
l
l
a
a
y
y
M
M
o
o
d
d
u
u
l
l
e
e
s
s
8.1 Handling Precautions
1) Since the display panel is being made of glass, do not apply mechanical impacts
such us dropping from a high position.
2) If the display panel is broken by some accident and the internal organic
substance leaks out, be careful not to inhale nor lick the organic substance.
3) If pressure is applied to the display surface or its neighborhood of the OEL
display module, the cell structure may be damaged and be careful not to apply
pressure to these sections.
4) The polarizer covering the surface of the OEL display module is soft and easily
scratched. Please be careful when handling the OEL display module.
5) When the surface of the polarizer of the OEL display module has soil, clean the
surface. It takes advantage of by using following adhesion tape.
* Scotch Mending Tape No. 810 or an equivalent
Never try to breathe upon the soiled surface nor wipe the surface using cloth
containing solvent such as ethyl alcohol, since the surface of the polarizer will
become cloudy.
Also, pay attention that the following liquid and solvent may spoil the polarizer:
* Water
* Ketone
* Aromatic Solvents
6) Hold OEL display module very carefully when placing OEL display module
into the system housing. Do not apply excessive stress or pressure to OEL
display module. And, do not over bend the film with electrode pattern layouts.
These stresses will influence the display performance. Also, secure sufficient
rigidity for the outer cases.
7) Do not apply stress to the LSI chips and the surrounding molded sections.
8) Do not disassemble nor modify the OEL display module.
9) Do not apply input signals while the logic power is off.
10) Pay sufficient attention to the working environments when handing OEL
display modules to prevent occurrence of element breakage accidents by static
electricity.
* Be sure to make human body grounding when handling OEL display
modules.
* Be sure to ground tools to use or assembly such as soldering irons.
* To suppress generation of static electricity, avoid carrying out assembly work
under dry environments.
* Protective film is being applied to the surface of the display panel of the OEL
display module. Be careful since static electricity may be generated when
exfoliating the protective film.
11) Protection film is being applied to the surface of the display panel and removes