User manual

LPC4357 Developer’s Kit - User’s Guide
Page 20
Copyright 2013 © Embedded Artists AB
4.8 SP6: SD/MMC Memory Card Interface
The board has a SD/MMC memory card interface, J13. Note that this interface SHALL NOT be used
for accessing the MCI peripheral interface of the LPC4350. Instead, there is a uSD/transflash memory
card interface on the bottom side of the LPC4357 OEM board.
There is visual indication via LED2 on the LPC4357 OEM board that supply voltage to the memory
card is present.
Figure 9 – SD/MMC Memory Card Interface – Not used
SD/MMC Connector
J13 – not used