User manual

LPC4357 Developer’s Kit - User’s Guide
Page 3
Copyright 2013 © Embedded Artists AB
Table of Contents
1 Document Revision History 5
2 Introduction 6
2.1 Features 6
2.2 ESD Precaution 7
2.2.1 ESD sensitivity on JTAG interface 8
2.3 General Handling Care 8
2.4 Code Read Protection 8
2.5 CE Assessment 8
2.6 Other Products from Embedded Artists 9
2.6.1 Design and Production Services 9
2.6.2 OEM / Education / QuickStart Boards and Kits 9
3 LPC4357 OEM Board Design 10
3.1 Memory Layout 10
3.1.1 NAND Flash 10
3.2 SPIFI 11
3.3 Bootloader Mode Setting 11
3.4 Trace Connector 12
3.5 I2S and SGPIO Connectors 12
3.6 uSD Memory Card Interface 12
3.7 Board Options 13
3.8 1 kBit I2C E2PROM with EUI-48™ Number 13
4 OEM Base Board Design 14
4.1 Modifications to OEM Base Board 14
4.2 SP2: OEM Board Connector 15
4.3 SP2: Current Measurements 15
4.4 SP3: Expansion Connectors 15
4.5 SP4: External Memory Bus 16
4.6 SP5: Debug Interfaces 17
4.7 SP6: Ethernet Interface 19
4.8 SP6: SD/MMC Memory Card Interface 20
4.9 SP6: VBAT/ALARM Handling 21
4.10 SP7: I2C Peripherals 22
4.11 SP8: Analog Input 23
4.12 SP8: Digital IO 24
4.13 SP8: Serial Expansion Connector 24
4.14 SP8: NXP/Jennic RF Module Interface 26
4.15 SP9: UART Multiplexing 27
4.16 SP9: RS232 Interface 28