User manual

LPCXpresso Experiment Kit - User’s Guide
Page 103
Copyright 2013 © Embedded Artists AB
Figure 61 – TeraTerm Configuration Step 2
There are many different settings for how the terminal program shall behave (i.e., interpret received
characters). Some adjustments might be needed, for example when to start displaying received
characters on a new line. Under menu Setup, sub-menu Terminal setup it is possible to control these
things. The screenshot below illustrates the settings possible for when a new-line shall be performed
on received characters. A common setting is LF, but it also depends on which character the LPC111x
application outputs.
Figure 62 – TeraTerm Configuration Step 3