User manual

LPCXpresso Experiment Kit - User’s Guide
Page 17
Copyright 2013 © Embedded Artists AB
socket connector for
wireless module
J15
This component and can
only be soldered to the pcb
(i.e., not used on the bread
board).
Sullins: NPPN101BFCN-RC
Digikey: S5751-10-ND
Shrouded pin list, 2x7
J16
This component and can
only be soldered to the pcb
(i.e., not used on the bread
board). Pin 1 is in the
top/upper left corner in the
picture.
Sullins: SBH11-PBPC-D07-
ST-BK
Digikey: S9170-ND
USB mini-B connector
J17
This component and can
only be soldered to the pcb
(i.e., not used on the bread
board).
Hirose: UX60-MB-5ST
Digikey: H2959CT-ND
Mouser: 798-UX60-MB-5ST
Pin list, 1x6
J18
Sullins: PEC06SAAN
Digikey: S1012E-06-ND
LEDs
LED1-LED8
http://en.wikipedia.org/
wiki/Led
This component is polarized.
One of the two pins is longer
than the other. This is the
positive side, the anode.
There is also a small cut on
the side of the plastic
package. This is on the short
pin side, which is the
negative side, the cathode.
Any 5mm LED with V
f
around
1.7V and 150mcd at 20mA
current will work, for
example:
Digikey: 1080-1136-ND