User manual

LPCXpresso Experiment Kit - User’s Guide
Page 22
Copyright 2013 © Embedded Artists AB
Rotary encoder, 1 pcs
SW6
This component and can
only be soldered to the pcb
(i.e., not used on the bread
board).
Below is without center
switch.
Panasonic: EVE-
GA1F1724B
Digikey: P10859-ND
Mouser: 667-EVE-
GA1F1724B
Voltage regulator,
MCP1700-330, 1 pcs
U1
http://en.wikipedia.org/
wiki/Low-
dropout_regulator
This component is polarized.
One side of the plastic
package is flat and the other
side is rounded. When
mounting this component,
make sure it is turned
correctly.
Microchip: MCP1700-
3302E/TO
Digikey: MCP1700-
3302E/TO-ND
Mouser: 579-MCP1700-
3302E/TO
Microcontroller,
LPC1114FN28, 1 pcs
U2
This component is polarized.
There is a cut in one end of
the plastic package, on the
short side. This indicates
where pin 1 is located. When
mounting this component
make sure it is turned
correctly.
NXP: LPC1114FN28/102
Digikey:
LPC1114FN28/102,12-ND
Mouser: 771-
LPC1114FN28/1021