User manual

LPCXpresso Prototype Board - User’s Guide

Page 12

There are two errors in the silk screen related to the mbed pinning (in-between the headers).

Figure 8 – LPCXpresso / mbed Signal name errata

Also note that all pin names refer to LPC1114/LPC1343 pin naming. The board was originally

designed for these processors. The LPC1769 and LPC1227 pin names are completely different.

Check the respective schematic for converting pin names.

Rows shall be switched,

upper: VB

lower: nR (reset)

Rows shall be switched,

upper: UART3-TX/SDA

lower: UART3-RX/SCL