User's Manual

LED Indic-
ator
Status Description
Solid organge Update running.
Solid red Impediment: Firmware
problem.
Fast ashing red General impediment: Laser
failure.
Event Action Visual Feedback
Long press. Turn sensor ON/
OFF.
Yes - see table above
Status power button.
Short press with
sensor OFF.
Shows battery
charge status for
ve sconds.
Battery indicators show
charge level.
Event Action Visual Feedback
Press and hold
button for 1-2
seconds.
Initiate the pairing
and bonding pro-
cess with a new
device.
Slow ashing white
Event Action Visual Feedback
Press and hold
reset button longer
than 3 seconds.
Restart the Tracker:
Reset all connec-
tions to factory
default (LAN to
Automatic and
WLAN/WiFi to
Access Point Mode).
Power button is fast ash-
ing red.
Description
The AT500 has Light Emitting Diode indicators at the front side and back
side of the telescope. They indicate the following states.
Power button
functionalities
Bluetooth pairing
button functional-
ities
Reset button func-
tionalities
Status LEDs
30 Description of the System