Quick Manual
Table Of Contents
10
Single Pack Battery:
1. The FDM device is connected somewhere on the vehicle CAN via a stub line, but is not the first or last
CAN device on the bus. The FDM device must not have a termination.
2. The FDM device is the last device to be connected to the vehicle CAN via the CAN line of the VIB.
The FDM must be terminated with 120 Ω.
3. The FDM device is connected on the vehicle CAN between VCU and VIB via a stub line. The FDM
device must not have a termination.