Quick Manual

5.3.1 Metal Free Area

Metals near the FDM antenna can ruin RF performance. To avoid this, the unit must be mounted so that there

is no metal 3 cm around the unit.

5.3.2 Routing of Cables

Any cables or wiring harnesses - including the own FDM wiring harness - should also not be routed near the

FDM antenna.

5.3.3 Avoid other Control Devices

Also, other devices i.e. vehicle control modules, airbags, radios and other antennas should not be near the

FDM device because transmitted RF signals can cause problems.