Full Product Manual

Left Side
Brick Panel
Rear Brick
Panel
Right Side
Brick Panel
UNPACKING THE REFRACTORY
BRICK LINER
1. Remove Refractory Brick panels from
the fireplace opening and unwrap the
plastic packing from each panel. .
2. Arrange panels on top of packing and
identify each piece in order of assembly
(see Figure S1).
3. Check all items for any shipping dam-
age. If damaged, contact Sure Heat
Manufacturing's Customer Service
Department to obtain replacement parts
at [phone].
Be sure to have your model number
and part number ready when you call.
6. Refer to parts list for reference.
The Refractory Brick liners are found in-
side the fireplace opening.
FIGURE S1
INSTALLING THE REFRACTORY
1. Locate round knockout pattern at bottom
of Right side brick panel.
2. Place end of a 1" diameter wood dowel
or metal pipe inside knockout area and
punch out entire recessed area.
(see Figure S2).
NOTE: Clean bottom hearth pan of all
debris before installing bottom hearth
brick to prevent obstruction.
3. Install refractory panels in order
starting with rear panel, and then both
side panels. Make sure the front edge of
the side panels are located behind the
firebrick edge brackets at the front of
the fireplace opening.
FIGURE S2
IMPORTANT SUPPLEMENTAL
INSTRUCTIONS
VFBC36A VFBC42A
1
Firebrick, Left 23361102 23421102
2
Firebrick, Middle 23361202 23421202
3
4
5
6
Firebrick,
Retainer, Firebrick
Retainer, Firebrick Top Ct.
Screw, Hex Head
Right
23361302
(5)1N3616
(1)1N3216
(12)49738100
23361302
(6)1N3616
(2)1N3216
(16)49738100
ITEM DESCRIPTION
PARTS LIST
VFBC32A
23321102
23321202
23361302
(5)1N3616
(1)1N3216
(12)49738100