Manualshelf

Full Product Manual

ManualsBrandsEmberglow ManualsFireplace Accessories & PartsFirebrick for 36 in. EmberGlow Fireplace Insert Model
12
INSTALLING THE REFRACTORY (Continued)
IMPORTANT SUPPLEMENTAL
INSTRUCTIONS
4. Install 2 1N3616 (90 degree angle) side brick retainers
(top and bottom) using provided hex head screws
(from hard-ware kit). Repeat this step for the other
side brick panel.
5. Using the provided 1N3216 brick retainer (see figure
S3), retain the top of the center panel of the brick
liner (use 1 retainer on VFBC32A and VFBC36A, 2
on VFBC42A).
At this point the brick panels should be retained at the
top and bottom of the inside of the firebox. You may
now refer to the main installation manual provided with
this firebox to complete the installation.
Figure S3
VFBC Refractory Supplement
Rev. 1.0 10-30-2013