Installation Guide

TROUBLESHOOTING
PROBLEM CAUSE CORRECTIVE ACTION
1. Pilot noise Excess pressure • 7 ot tsujda dna erusserp enil kcehC
inch water column.
• Adjust pilot location away from flame.
2. Pilot will not light Inadequate gas flow
Thermocouple too tight
• Check all valves
• Clear obstructions
• Check for line kinks
• Loosen Thermocouple slightly
3. retfa tuo og renruB & toliP
burning for several minutes (up to
one hour)
Overheating of Thermocouple • renruB niaM taht ees ot kcehC
Flames are not hitting the
Thermocouple (move Pilot
Assembly so only the tips of
the Thermocouple and pilot are
handing over the burner pan).
• ,esuac eht si taht fi ,sgol noitisopeR
move Main Burner flames away
from the Thermocouple.
• meht nepo ,srood ssalg evah uoy fI
fully when opearting your gas logs.
5