Instructions / Assembly

SINGLE & DUAL SYSTEMS

STOP

INSTALLATION OF NATURAL GAS PILOT VALVE

This Safety Pilot Kit contains a C.S.A Certified Control Valve, which provides a safe and convenient way to

ignite and control the flame height on your energy efﬁcient gas log set.

Note: Use pipe compound on all male threads to seal joints.

A. This Safety Pilot Kit contains a Natural Gas Oriﬁce and L.P. Gas hardware. LP instructions are packaged

separately in this kit.

B. Attach Pilot Bracket (Part #8) to the Burner Pan using one sheet metal screw (Part #9). Install sheet metal

screw into top left hole of the bracket (See Figure 1)

C. Attach the 3/8" straight Flared Fitting

(Part #4) to the “IN” position of the

Gas Control Valve using pipe joint

compound (See figure 5).

D. Attach Pilot Gas Supply Line

(Part #6) and the Thermocouple Lead

(Part #5) to the Gas Control Valve

(See Figure 2)

NOTE: When connecting to the

Control Valve, hand tighten both

the Pilot Gas supply line and

Thermocouple lead, then tighten

1/8 turn with a wrench. DO NOT

OVER TIGHTEN as this may cause

the Pilot to not function properly.

Figure 2

Assembly

Figure 1 (A&B) Pilot Burner

PILOT ASSEMBLY

Gas Control Valve

Thermocouple Connection

Pilot Connection

Part 6

Part 5

Part 3

Pilot Burner Connections