User manual

Page | 105
Figure 24: DirectShow Branch
3. Select Third Party > BSP > mini8510:ARMV4I > drivers >
camera in the Catalogue Items View tree view on the left
side of the Visual Studio 2005 window, and then select Build >
Rebuild Solution on the menu bar to start compiling;
4. Copy the generated file CameraDshowApp_analog.exe from
C:\WINCE600\platform\mini8510\files\ to an SD card,
and then insert it into the SBC8140;
5. Connect the camera module (needs to be purchased
separately) to the SBC8140 and power it on, then execute the
CameraDshowApp_analog.exe (saved on the SD card) under a
WinCE system to test the CAM8000-A module;
4.6.3 CAM8000-D Module
1. Modify the line set BSP_NODIGITAL_CAMERA in the file
mini8510.bat as shown below;
set BSP_NODIGITAL_CAMERA=