User manual

Page | 12
2.1.4 Display Subsystem
The display subsystem is used to provide an LCD or TV interface with logic
images which are stored in the frame buffer (SDRAM or SRAM); it is made
up of:
 Display control (DISPC) module
 Remote frame buffering interface (RFBI) module
 I/O module and DSI protocol engine of the display serial interface
(DSI)
 DSI PLLcontroller driver (DSI PLL and high-speed frequency divider
 NTSC/PAL video codec
The display controller and DSI protocol engine are connected to the
internal bus of L3 and L4, while the RFBI and TV output codec module are
connected to the internal bus of L.
2.1.5 3D Graphics Acceleration System
The 2D/3D graphics acceleration system (SGX) can speed up 2D/3D
graphic applications. The SGX system is built on the POWERVR® SGX core
from Imagination Technologies. It is a new-generation of programmable
POWERVR graphics core. POWERVR SGX530 v1.2.5 has an adaptable
architecture which makes it suited for a wide range of applications from
main-stream mobile devices to high-end desk-top graphics processing. Its
target applications are mainly feature phones, PDAs and some portable
game consoles.