User manual

Page | 84
Notice:
 WCDMA8000-U is an optional module. It must be purchased separately.
3.8.12 Demonstration of the Android System
Copy all the files under X:\linux\demo\Android\image (where X is the label
of your DVD drive) to an SD card and insert it into the SBC8140, then
power on the kit while pressing and holding the BOOT button (Button
CN121); The information in the HyperTerminal window is shown below;
60
Texas Instruments X-Loader 1.47 (Apr 23 2012 - 09:09:16)
Starting X-loader on MMC
Reading boot sector
1154092 Bytes Read from MMC
Starting OS Bootloader from MMC...
Starting OS Bootloader...
U-Boot 2010.06-rc1-svn (Apr 17 2012 - 10:28:23)
OMAP34xx/35xx-GP ES2.1, CPU-OPP2 L3-165MHz
OMAP3 SBC8140 board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
NAND: 512 MiB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
SBC8140 xM Rev A
Die ID #259000029e38000001683b060d023028
NAND erase: device 0 whole chip
Skipping bad block at 0x08660000
Erasing at 0x1ffe0000 -- 100% complete.
OK