User`s guide

Chapter 13 System Security
Emblaze VCON HD3000 User’s Guide 141
13.1 Setting a Security Password
A password prevents unauthorized users from changing the system configuration,
initiating videoconferences, and/or accepting videoconference calls. The password
is mandatory for locking the system completely from all of the actions stated above.
A password for accessing security should be unique and known only to the
administrators. After a password is defined, any user must enter the password to
gain access to the restricted functions. This password is also required for accessing
remote configuration through the HD3000’s Web-based Manager (see Chapter 10,
“HD3000’s Web Management”). If you forget your password, contact your local
Emblaze VCON distributor's technical support.
³ To set a security password
T In the Security dialog box’s Password box, enter numbers and/or
letters. To type letters, press the yellow KEYBOARD SoftKey.
Enter the system’s
password using
numbers and/or
letters. To type
letters, press the
yellow softKey.