User`s guide

Appendix B Software Upgrade

156 Emblaze VCON HD3000 User’s Guide

Enable Remote Upgrade

To enable upgrading through the HD utility, you must enable remote upgrading in

the HD3000’s Security dialog box.

³ To enable remote software upgrading of the HD3000

2. Navigate to the Security tab. If you previously set a security password

(see “Setting a Security Password” on page 141), enter it in the Password

dialog box.

3. Select Enable Remote Upgrade.

1. Press <Menu>. The main Menu opens. Select Options.

4. Press <OK>.

Select Options.

Select Enable

Remote Upgrade

to open the

connection for

upgrading software.