User`s guide

Chapter 2 Setting Up HD3000
Emblaze VCON HD3000 User’s Guide 21
Connecting the LAN
A standard RJ-45 interface for connection to your LAN is provided.
³ To connect a network (LAN) cable to the system
T Connect the LAN cable between the LAN port (RJ-45) on the rear of the
system and to the LAN socket on the wall.
HD3000 to LAN Connection
After you turn on the HD3000, check that the network connection is correct.
³ To check for correct network connection
If the connection to the network is working properly, the Diagnostics
dialog box displays the line speed of the connection.
1. Press <Status>. The Status dialog box opens.
2. Press the green DIAGNOSE SoftKey. The Diagnostics dialog
opens.