User`s guide

Chapter 3 Getting Started
Emblaze VCON HD3000 User’s Guide 41
³ To enter alphabetical characters
1. Navigate to the box in the dialog where the data is to be entered.
3.5 Setting up the Network Configuration
To initiate and receive calls, the HD3000’s network LAN and H.323 configuration
must be defined correctly.
2. Press the yellow KEYBOARD SoftKey on the remote control.
The on-screen keyboard appears.
On-screen Keyboard for Alphanumeric Data Entry
To enter lower case letters, press the red LOWER CASE SoftKey
on the remote control. To enter upper case letters, press the red
SoftKey again.
Press the arrow keys to navigate to the character you want to
enter.
3. Press the Select button to select the character.
If you make a mistake, select the DEL button on the on-screen
keyboard or the <Clear> button on the remote control.
4. Press <OK> to close the keyboard. The characters you selected are
entered in the dialog box.
1. Press <Menu>. The main Menu appears. Select Network.
2. Define LAN and H.323 properties as required. For a full
explanation of the Network Configuration, see “Communication
and Network Configuration” on page 63.
Menu
OK
Menu