User`s guide

Chapter 6 Video and Audio Adjustments
80 Emblaze VCON HD3000 User’s Guide
Selecting the Current Camera
Current camera selection is always available. At any time, you can select different
local video sources.
³ To select the current camera
1. Press <camera>. The Local Camera Selection menu opens.
The currently selected camera is highlighted.
2. Press the left or right arrow buttons to switch between the
local video sources (up to six):
During a videoconference, you can also select the current remote video
source if the remote party enabled Far End Camera Control (FECC). Using
FECC, one party may select, position and control the other party’s camera.
To enable the remote party to control your camera, see “Far End Camera
Control” on page 83.
Press the down
arrow to switch to
remote camera
selection (if Far
End Camera
control is
enabled).
Press the up arrow to switch back
to local camera selection.
AuxCamera 1 is selected.
HD3000 main
camera
A Composite camera
connected to a CAM
connector.
A video source
connected to the
VCR connector.
An S-Video
camera
connected to a
CAM connector.