Server Support Products for Solaris Server Installation Guide

pkgadd -d INITTOOL.pkg

5. To install the software from the server support CD (any storage

system), do the following:

a. In the server’s drive, insert the server support CD, which

shipped with the storage system or the upgrade kit (for

AX-series systems upgrading to Navisphere Manager).

b. From a console window, mount the CD:

mount /mnt/cdrom

c. Install the Navisphere Storage System Initialization Utility:

/cdrom/cdrom0/solaris

pkgadd -d ./solaris/INITTOOL.pkg

6. At the prompt to select the packages to process, enter 1 to select

INITTOOL.

7. Atthepromptaboutscriptsthatexecutewithsuperuserpermission

during the installation, enter y.

Thescreendisplaysinformationabouttheinstallation.

8. When installation is complete, exit the /cdrom directory.

For example, execute cd /.

9. If you installed the initialization utility from the CD, remove the

CD from the server’s CD drive.

Removing the St

orage System Initialization Utility on a Solaris server

1. At the Solaris server, log in as superuser (root).

2. Execute the pkgrm INITTOOL.pkg command to remove the

Storage System Initialization Utility and confirm if prompted by

entering y and y. If the initialization utility is not installed, you will

receive a

Not found error message.

EMC CLARiiON Server Support Products for Solaris Server Installation Guide