Server Support Products for Solaris Server Installation Guide

7. Select the packages that you want to install by doing one of the

following:

 Enter 1 (to install the host agent)

 Enter 2 (to install CLI)

 Enter All (to install both the host agent and CLI)

8. Enter y and y to begin the installation.

The installation program looks for any agent configuration files

you may already have on your system. If the program does

not find any agent configuration files, then you have finished

installing the agent; go to step 10. If the program does find any

existing configuration files, it displays a message like the following:

At Least 1 saved config file exists for Navisphere

Agent.

Please select 1 of the following:

[1]

Restore/etc/Navisphere/.Naviagent-config.000120:105

[2]

Restore/etc/Navisphere/.Naviagent-config.000121:140

[3] Quit

Select number1-3.

9. Select the existing file you want to serve as the agent configuration

file. The software will retain that file and rename it with the required

agent filename, agent.config. Generally, you will want to use the

most recent file, as shown by the numeric date suffix. To use the

default configuration file, specify the number for the Quit option.

10. When the installation of the host agent is complete, a successful

message displays. If you are also installing the CLI, enter y at the

CLI installation prompt as you did for the agent.

11. If you installed the host agent/CLI from the server support CD,

when installation is complete, exit the /cdrom directory (for

example, execute cd /),andthenremovetheCDfromtheservers’s

CD drive.

Note: Any user who can access the management station can change or

delete the Navisphere files you just installed. You may want to change

permissions on these files to restrict access to them.

EMC CLARiiON Server Support Products for Solaris Server Installation Guide