Server Support Products for Solaris Server Installation Guide

12. Verify the installation by entering the command pkginfo -l | grep

NAVI*.

Depending on what you installed, some of the following may be

displayed:

 NAVIAGENT: Navisphere Disk Array Management Tool

(Agent)

 NAVICLI: Navisphere Disk Array Management Tool (CLI)

 NAVISCLI: Navisphere Disk Array Management Tool (CLI)

13. If you have a multihomed host (multiple NIC cards installed on

the host), create an agentID.txt file to ensure that the agent finds

the correct NIC card.

Note: A multihomed host machine has multiple IP addresses connected to

networks; it is physically connected to multiple data links that can be on the

same or different networks. When you install Navisphere Host Agent on a

multihomed host, the host agent, by default, binds to the first NIC in the

host. If your host is multihomed, for the host agent to successfully register

with the desired CLARiiON storage system, you need to configure the host

agenttobindtoaspecificNIC.YoudothisbysettingupanagentID.txt file.

a. Using a text editor that does not add special formatting, create

or edit a file named agentID.txt (case sensitive) in either / (root)

or in a directory of your choice.

b. Add the following two separate lines to the agentID.txt file,

with no special formatting:

First line:

Fullyqualified hostname of the host

Second line: IP address of the HBA/NIC port that you

want Navisphere agent to use

Forexample,ifyourhostisnamedhost28 on the domain

mydomain.com and your host contains two HBAs/NICs,

HBA1/NIC1 with IP address 192.111.222.2 and HBA2/NIC2

with IP address 192.111.222.3, and you want the host agent to

use NIC 2, you would configure agentID.txt as follows:

host28.mydomain.com

EMC CLARiiON Server Support Products for Solaris Server Installation Guide