Server Support Products for Solaris Server Installation Guide

About EMC Navisph

ere Software

The following EMC

® server-based software is available on the server

support CD that sh

ipped with your storage system or your upgrade kit

(for AX-series sy

stems upgrading to Navisphere Manager):

 Navisphere® Sto

rage System Initialization Utility

 Navisphere Host

Agent

 Navisphere Serve

rUtility

 Admsnap Utility

 Navisphere Comm

and Line Interface (CLI)

About the Navisphere Storage System Initialization Utility

For CX3-series and CX-series Fibre Channel storage systems, use the

utility to discover storage systems, and set network parameters (IP

address, subnet mask, and default gateway).

Note: For CX-series storage systems, an authorized service provider must

install and run the Initialization Utility.

For AX-series storage systems, use the utility to discover storage

systems, set network parameters (IP address, subnet mask, and default

gateway), and create management user accounts. In addition, for

AX150 iSCSI storage systems, use the utility to set network parameters

for the storage system’s iSCSI data ports.

You can run the Navisphere Storage System Initialization Utility from

the server support CD or you can install it on a server that is connected

to the storage system. We recommend that you install the utility on at

least one server that is connected to the storage system.

EMC CLARiiON Server Support Products for Solaris Server Installation Guide