Server Support Products for Solaris Server Installation Guide

Installing and re

moving the Navisphere Server Utility

This section desc

ribes how to install the Navisphere Server Utility on

a server connecte

d to a CX3-series, CX-series, or AX-series storage

system.

Installing the Navisphere Server Utility on a Solaris server

EMC recommends that you install the most recent version of the

Navisphere Server Utility software that is appropriate for your

configuration. You can download the most recent version from either

the software download page on the Powerlink website (CX3–series and

CX-series) or on the support website (AX-series storage systems). You

can also install the software from the server support CD (any storage

system); however, the CD may not contain the most recent version for

your configuration.

1. Log in to the server as superuser (root).

2. If any previous revision of the server utility is installed on the

server, remove it before continuing.

Note: To verify if the server utility is installed, enter the pkginfo |grep

HOST command.

3. To download the software for CX3–series or CX-series storage

systems, do the following:

a. On the Powerlink website, select Support > Software

Downloads and Licensing and navigate to the Navisphere

Server Utility download section, which may be in either

the CLARiiON Navisphere Server Utility section or the

CLARiiON Navisphere Manager section.

b. Select the appropriate Navisphere Server Utility version to

download and select the option to save the zip file to your server.

c. At the command line prompt, navigate to the directory where

you saved the zip file and unzip the file.

unzip Sun_HOSTUTIL-version.zip

EMC CLARiiON Server Support Products for Solaris Server Installation Guide