Server Support Products for Solaris Server Installation Guide

-secfilepath securityfilepath -port 443|2163 [-directory outputdirectory]
where:
-ip IPaddress
Specifies the IP address of an SP on the storage system
to which you will upload the report. You cannot use
this switch in conjunction with the -h switch.
-h IPaddress | network_name
Specifies the IP address or the network name of an SP on the
storage system to which you will upload the report. You
cannot usethisswitchinconjunctionwiththe-ip switch.
-user|-u username
Specifies the login name for the storage system. You must use this
switch in conjunction with the -password|-p and -scope|-s switches.
You cannot use this switch in conjunction with the -secfilepath switch.
-password|-p userpassword
Specifies the password required for access to the storage
system. Youmustusethisswitchinconjunctionwith
the -user|-u and -scope|-s switches. You cannot use
this switch in conjunction with the -secfilepath switch.
-scope|-s scopelevel
Specifies the level of access this username and password has to the
storage system - 0 = global; 1 = local; 2 = LDAP. You must use this
switch in conjunction with the -user|-u and -password|-p switches.
You cannot use this switch in conjunction with the -secfilepath switch.
-secfilepath securityfilepath
SearchesthesecurityfileforthespecifiedIPaddress.Iftheutilitydoes
not find the specified IP address, then the utility will use the
default entry in the security file.
Important: A security file is required to run this switch. For information on
how to create a security file, refer to the EMC Navisphere Command Line (CLI)
Reference guide.
EMC CLARiiON Server Support Products for Solaris Server Installation Guide
39