Server Support Products for Windows Installation Guide

Installing Navisphere Host Agent
A-9
Silent Installations and Removals
Installing Navisphere Host Agent
Depending on which revision of the Host Agent is installed, follow
the appropriate procedure below.
Important We do not recommend that you install the Navisphere Host Agent
using the command line interface unless you are an advanced user and are
experienced with using the agent configuration file. If you are not, we
recommend that you install these products using the InstallShield Wizard as
described in Chapter 3, Installing and Using the Navisphere Host Agent or Server
Utility.
Installing revision 6.7 or earlier
If you are installing Revision 6.7 or earlier of the Host Agent or CLI,
you must use the InstallShield Wizard as described in Chapter 3,
Installing and Using the Navisphere Host Agent or Server Utility.
Installing revision 6.16 or later
If you are installing Revision 6.16 or later, refer to the procedure
below.
Preparing for the installation
1. Log in to the Windows server as Administrator or someone who
has administrative privileges.
2. If the Host Agent is already installed, you must remove it, as
described on page A-16 if removing Revision 6.16 or later, or page
page 2-5 if removing Revision 6.7 or earlier. The installation
program does not let you overwrite an existing Host Agent.
3. In the server’s drive, insert the server support CD that shipped
with your storage system or your upgrade kit (for AX-Series
systems upgrading to Navisphere Manager).
4. From the CD-ROM directory, navigate to the windows >
naviagent folder.
5. Select the NaviAgent.exe file.
6. Click Next in the Navisphere Agent - Welcome dialog box.
7. Click Browse to select the folder where the files should be
unpacked then click Continue.