User manual

1
diagCommandShow
1-109
Telnet Commands
diagCommandShow
Display a list of diagnostic commands.
Syntax
diagCommandShow
Availability Admin
Description Use this command to display a list of diagnostic commands for v4.0.
Operands None
Example
To display a list of v4.0 diagnostic commands:
switch:admin> diagcommandshow
diagCommandShow - Display diagnostics command parameter and error info.
To show the parameters for a diagnostic test enter:
diagCommandShow -name <test_name>
LIST OF DIAGNOSTIC COMMANDS WITH DESCRIPTION:
diagmodeshow Display diagnostic burnin controls
statsclear Clear statistics counters
diagclearerror Clear diagnostics errors
diagshow Display diagnostics status of ports
diagcommandshow Display diagnostics help info
diaghelp Display diagnostics help info
diagstatus Display info about running diagnostics
diagoktorun Check to see if it is ok to run diagnostics
datatypeshow Display available data patterns
portregtest Port register diagnostic
mulregdump Dump the contents of the general purpose registers
ramdump Dump the contents of specified RAM register or all
sramretentiontest SRAM Data Retention diagnostic
spinsilk Cross-connected line-speed exerciser
minicycle Cross-connected line-speed exerciser
spinjitter line-speed jitter measurement
crossporttest Cross-connected port diagnostic
loopporttest L-port diagnostic
portloopbacktest Port internal loopback diagnostic
txdpath Miniswitch TX data path diagnostic
spinfab circulates frames between live switches
backport backplane routing and VC allocation test
centralmemorytest Central memory diagnostic
cmemretentiontest Central Mem Data Retention diagnostic
cmitest CMI bus connection diagnostic
camtest Quickloop CAM diagnostic